1000

IXP Two Directional Impactable Fiberglass Bi-Parting Cooler/Freezer Door System

Click to enlarge
Summary
The new IXP Impactor is impactable from both sides! Opening and closing at a rate of eight feet per second sounds impressive but with even the most brutal collision (from either direction) the door simply returns to its normal operating position.
Features
  • Standard high dual speed operation (96”/sec open - 48”/sec close).
  • Strong impactable panels with a full 90 degree swing capability in both directions.
  • High impact composite reinforced panel material.
  • 4” fully insulated impactable panel.
  • Standard stainless steel header and rail with epoxy coated roller trucks.
  • Emergency egress (optional).
  • Integrated and fully protected self-regulating heater system.
  • No floor hardware.
  • Steel reinforced polyurethane drive belt. 
  • No reversing edge extrusions to damage.Integrated cut-off switch to stop door movement if panels are impacted.
  • Standard NEMA 4 fiberglass control box.
Door Sizes
  • Minimum: 7’x 6’.
  • Maximum: 12' x 15'.
    Other sizes available - consult factory.
Panel Construction
  • Sealed and unitized design.
  • High impact fiberglass reinforced composite shells.
  • 1/8” thick high impact fiberglass composite angles along all vertical panel edges.
  • USDA approved material.
  • Full perimeter adjustable gaskets.

BREAKAWAY PANEL CONSTRUCTION (Optional)

  • Full impact capable panelsallow for a 90° swing   capability in both directions.
  • 1/8” thick, 48” high impact capable polymer plating on both sides of breakaway panels.
  • Panels provided with breakaway reset assist.
  • Automatic breakaway power cut-off switch.
Insulation
  • 4" thick closed cell, R25.
Header/Rail and Side Frame Construction

TRACK CONSTRUCTION

  • Stainless steel header and rail.
  • USDA approved roller trucks and steel hardware.
  • Nylon rollers with lubed for life bearings.
  • Steel reinforced polyurethane drive belt.
Electrical Features
  • High output, high torque electric drive system powered by 1-3/4 hp totally enclosed motor.
  • NEMA-4 fiberglass control box.
Operation
  • Electric:96” ips* opening 48” ips closing *inches per second.
  • PLC (Programmable Logic Controls).
  • VFD (Variable Frequency Drive).
  • 208/230/460 volt, 3 phase power required. 
  • Manual.
Performance Features
  • Door panel reversing for instant stop/reverse through main control box.
  • Manual operation.
  • Emergency egress capable (optional).
Track Construction
  • Stainless steel header and rail.
  • USDA approved roller trucks and steel hardware.
  • Nylon rollers with lubed for life bearings.
  • Steel reinforced polyurethane drive belt.
Warranty
  • 1 year limited warranty on parts and labor.
Application

Our new double-jointed sliding door can take a hit in both directions.  But it's so fast you'll be lucky to make impact at all.