1500

IXP Two Directional Impactable Single Slide Cooler/Freezer Door System

Click to enlarge
Summary
The Enviro IXP Impactor™ cold storage door has a strong impactable panel that is designed to swing a full 90 degrees in BOTH directions. 
Features
  • Standard high dual speed operation (48”/sec open - 24”/sec close).
  • Strong impactable panel with a full 90 degree swing capability in both directions, while door is opening or closing.
  • High impact composite reinforced panel material.
  • 4” fully insulated impactable panel.
  • Standard stainless steel header and rail with epoxy coated roller trucks.
  • Integrated and fully protected self-regulating heater system.No floor hardware.Steel reinforced polyurethane drive belt.
  • No reversing edge extrusions to damage.
  • Integrated cut-off switch to stop door movement if panels are impacted.
  • Standard NEMA 4 fiberglass control box.
Door Sizes
  • Minimum: 3’ x 6” x 6’0”
  • Maximum: 10'0” x 15'0”.
    Other sizes available - consult factory.
Panel Construction
  • Sealed and unitized design.
  • High impact fiberglass reinforced composite shells.
  • 1/8” thick high impact fiberglass composite angles along all vertical panel edges.
  • USDA approved material.
  • Full perimeter adjustable gaskets

 

BREAKAWAY PANEL CONSTRUCTION (Optional)

  • Full impact capable panel allow for a 90° swing capability in both directions.
  • 1/8” thick, 48” high impact capable polymer plating on both sides of breakaway panel.
  • Panel provided with breakaway reset assist.
  • Automatic breakaway power cut-off switch.
Insulation
  • 4" thick closed cell, R25.
Electrical Features
  • High output, high torque electric drive system powered by 3/4 hp totally enclosed motor.
  • NEMA-4 fiberglass control box
Operation
  • Electric:48” ips* opening 24” ips closing *inches per second.
  • PLC (Programmable Logic Controls).
  • VFD (Variable Frequency Drive).
  • 208/230/460 volt, 3 phase power required.
  • Manual.
Performance Features
  • Door panel reversing for instant stop/reverse through main control box.
  • Manual operation.
Options
  • Non-breakaway panel construction.
  • Jamb capping.
  • Mirror image header.
  • Wash down grade operator.
  • Pedestrian opening (remote push button station for partial opening - automatic time delay close.  All adjustable).
  • Extra pull cord or single push button activation (2-pull cord standard).
  • Photoeye activation or reversing photoeye.
  • Radio control activation.
  • Loop detector system activation.
  • Motion sensors.
  • Presence sensors.
  • Pre-announce to close kit (light/alarm/or combo).
  • UNI-directional sensors. 
  • Sensor mounting brackets.
  • Strobe lights.
  • Shroud for rail.
  • Windows-2 lite.
  • Future power.
Track Construction
  • Stainless steel header and rail.
  • USDA approved  epoxy coated roller trucks and steel hardware.
  • Nylon rollers with lubed for life bearings.
  • Steel reinforced polyurethane drive belt.
Warranty
  • 1 year limited warranty on parts and labor.
Application
The revolutionary IXP Impactor™ eliminates would-be damage, erasing costly repairs and maintenance due to it's quick opening and closing rate of eight feet per second and 90 degree swing radius In Both Directions!