Enviro Cold Storage Doors

Features

• High strength 1-3/4" thick lightweight seamless (no center seam) gel-coated laminated fiberglass panel for easy cleaning. Stainless steel (20 gauge) edge capping for added strength and protection.
• Corrosion-resistant, heavy-duty door hardware.
• Recessed stainless steel pull handles.
• Top/bottom guidance system positively maintains door seal and position. Ensures fast, controlled operation with minimal gasket wear.
• Adjustable panel hardware for in-field adjustments.Maintains a positive and tight seal.
• Full perimeter, non-marking, non-shedding, nonabsorptive gray vinyl blade-type gasket capable of holding a seal under positive/negative pressure.
• NO hardware mounted into floor.
• Optional vision panel with sloped one piece stainless steel frame; no visible fasteners.
• Stainless steel sloped shroud conceals rail (and operator on powered model).
• All visible stainless steel is 304, #4 finish (316 stainless steel optional).
• Power model also includes: Electromechanical operator with integrated control panel, completely self-contained within shroud.
• Specially designed gearless, oil-free belt drive. Manual operation during unexpected power failures.
• High strength non-shedding, non-absorptive fiberglass reinforced drive belt for quiet reliable operation.
• Torque sensing reversing capability on both the opening and closing cycles.
• Two send and receive reversing photoeyes in the side frame.

Door Sizes

To maintain the integrity of a seamless (no center seam) construction, the following restrictions
apply:

• Up to 10’0” high if maximum width of opening is 7’7” or less.
• Up to 8’7” wide if maximum height of opening is 8’0” or less.
  (Other sizes available -Consult factory.)

Panel Construction

• Gel-coated fiberglass sheet laminated to an expanded polystyrene core material.
• 20 gauge stainless steel edge capping.
  Full perimeter, non-marking, non-shedding, nonabsorptive gray vinyl blade type.

Operation

• Powered model has 1/8 h.p. electromechanical operator.
  (Open-24”/sec. - Close-18”/sec.).
• Gearless, oil-free drive.

Performance Features

• Torque sensing stop/reverse both in the open and closing cycles.
• (2) Send & receive reversing photoeyes.

Options

• Manual operation.
• Stainless steel clad panel.
• Vision panel (optional sizes).
• Swinging egress panel available.
• Stainless steel rail.
• Stainless steel roller truck.
• 20 gauge stainless steel kickplates on door panel.

Options for Power Models Only

• Touchless wall-mounted activation switch.
• Actuators: Pull cord; photoeye; radio control; loop detector, motion detector; or O/C/S pushbutton. Interlock system.
• Electronic lock.
• Washdown grade operator.

Warranty

• One year on all components.