503

Galvanized Metal Single Sliding Power Operated Cooler or Freezer Door

Click to enlarge
Summary

Enviro's single sliding galvanized metal cooler or freezer door features a top/bottom guidance system that positively maintains door position; insuring fast, controlled operation and minimizing gasket wear.

Features
  • Hydraulic power for speed and long life (50" per second).
  • (HDS power 80” per second-optional.)
  • Sealed and unitized high strength panel with reinforced steel sub-frames for dimensional stability.
  • Cast "almag" corners and raised 16 gauge edge capping for added strength and protection.
  • PLC (Programmable Logic Controls).
  • Full perimeter adjustable gasketing.
  • Internal steel mounting plates for solid hardware anchoring.
  • Heavy duty steel hardware.
  • Reversing edge provides instant stop/reverse with no mechanical lag time.
  • Top/bottom guidance system positively maintains door position; insures fast, controlled operation; minimizes gasket wear.
  • Adjustable top/bottom panel hardware for in-field adjustments, maintains positive pull-in and insures tight sealing.
  • 5 year hydraulic operator warranty.
Door Sizes
  • Minimum: 5' x 7'.
  • Maximum: 10’ x 14’
    Other sizes available - consult factory.
Panel Construction
  • Unitized design.
  • 16 gauge formed galvanized steel edge capping and recessed panel for added protection.
  • Shell construction of 24 gauge galvanized steel.
  • Cast "Almag" corners.
  • 11 gauge steel sub-frame and hardware mounting plates.
  • Full perimeter gaskets.
Insulation
  • 3" or 5" poured polyurethane foam.
  • R25 or R41 rated.
  • K factor of .12 at 75°F.
Hydraulic System
  • High output hydraulic pump driven by 1 hp totally enclosed motor.
  • Low speed high torque motor.
  • High pressure hydraulic hoses.
  • NEMA-4 rated fiberglass box.
Operation
  • PLC (Programmable Logic Controls).
  • VFD (Variable Frequency Drive) on HDS System.
  • Manual.
Door Speeds

(*inches per second.)

  • Electric (mechanical) - (18 ips* travel speed).
  • Hydraulic (standard) - (25 ips* travel speed).
  • HDS - Hydraulic Dual Speed operator - (optional) - (50 ips* open). (25 ips* close).
Performance Features
  • Pneumatic reversing edge for instant stop/reverse.
  • Manual inside emergency release.
Options
  • Heater cable.
  • Thermostat heat control.
  • Inside trim.
  • Panel: stainless steel or white embossed metal.
  • Frame and header: stainless steel or white embossed metal.
  • Color (consult factory).
  • Pedestrian opening (in door pushbutton for partial opening - automatic time delay close, all adjustable).
  • Extra pull cord or single push button actuators (2-pull cord standard).
  • Photoeye actuator or reversing photoeye.
  • Radio control actuator.
  • Loop detector system actuator.
  • Padlock hasp:
    a) Outside hasp.
    b) Inside hasp flush mount.
    c) Lock with power cutoff.
    d) Lock with power cut off and inside emergency release.
  • Shroud for rail.
  • Steel self-support system.
  • Remote mount hydraulics operation.
  • Windows, 12" x 12" 2 or 3 lite, heated or unheated.
  • Future power.
  • Track port.
  • Angle front heated sill.
Warranty
  • 5 year on hydraulic operator.
  • 1 year on all other components.
Application